 |
 |
19th March 2010 11:21pm | |
 |
|
Contains a wealth of essential, easy-to-follow information on subjects such as safety, marksmanship techniques, quarry recognition, maintenance, and much, much more. Available from all good gun shops. |
|
 |
 |
|
A concise and detailed history of BSA's commercial arms production from 1906-2002. Available from all good gun shops. |
|
 |
|
|
|
|
 |
 |
|
Silencers aren’t just for hunting use. All precharged pneumatic airguns are more enjoyable to shoot when fitted with a properly designed silencer and reducing the muzzle noise of your airgun is always a good idea, especially for those who enjoy back garden fun-gun sessions. Remember too, that a silencer fitted to a break-barrel rifle can act as a cocking aid. So, no matter what type of shooting you do, a silencer is well worth considering. BSA silencers are made specifically to complement our range of rifles and each model is designed to provide years of maintenance-free use. Hi-tech on the inside, smooth and stylish on the outside, our silencers are sound investments for shooters of all kinds. |
|
|
|
|
 |
|
New VC Silencer
The only airgun silencer you will ever need. This latest-generation silencer actually allows the shooter to match its internal specification to suit the calibre of the rifle. A supplied Allen key permits the removal of the end of the silencer, so that different size restrictors can be fitted, so increasing or decreasing the muzzle aperture according to calibre to maximise the reduction in noise-energy as the pellet leaves the moderator. This ‘variable choke’ facility turns a silencer into one of the most useful hunting accessories of all time.
The BSA VC Silencer is supplied with 2- interchangeable muzzle restrictors that should be matched to the calibre of the airgun it is to be fitted to. The black restrictor must be fitted to .177 (4.5mm) calibre airguns. The white restrictor must be fitted to .22 (5.5mm) calibre airguns. The silencer is supplied with the white restrictor pre-fitted. Please note both restrictors have oversize holes to allow for barrels that have non – concentric bores. If the silencer is to be used on .25 (6.35mm) calibre airguns, no restrictors are fitted. Access to the restrictor is gained by removing the restrictor screw from the Silencer end cap using the 8mm Allen key provided.
NOTE: Fitting the silencer to your airgun may change the pellet point of impact – shoot a test group and re-zero the sights if necessary.
|
|
 |
|
Volumetric Silencer
The Volumetric takes the high-capacity approach and applies it to the output of spring-powered rifles. The internal baffle configuration is custom designed to tame the blast from a spring-piston powerplant and its no-compromise mounting system means that the Volumetric doubles as a hand-filling cocking aid. Highly recommended for our Supersport rifles and fitted as standard on the Lightning.
|
|
|
 |
|
Muzzle Brake
This stylish, discreet accessory has two main functions, both of which it carries out extremely well. First, it provides a neat finish to the rifle’s barrel and protects the precision crowning of the muzzle and the threads from knocks and similar damage. Secondly, the multi-port section of the Muzzle Brake allows air to vent to atmosphere while the pellet exits in reduced turbulence.
|
 |
|
16-6617 SAS Silencer Adaptor
Now Supersport owners can enjoy the full benefit of the BSA SAS silencer courtesy of this easily fitted adaptor. Fixed to the barrel by a grub screw, this high quality accessory comes complete with a threaded and capped adaptor which attaches an SAS silencer in seconds. Simple, sturdy and totally secure. |
 |
|
16-6627 Silencer Adaptor
Here’s a neat adaptor for owners of all carbine spring rifles or classics such as the Goldstar and Superstar. Just attach the larger section of the adaptor onto your rifle’s muzzle thread, and you have a male thread ready and waiting to accept a silencer – including the all-conquering SAS. |
|
|
|
|
|
|
